SiaLinda: Overbust corset Pamela, royal blue black premium collection
SiaLinda proudly presents: Corset Pamela in noble color combination royal blue and black!
(It is less suitable for cup A and B).
The stays are slightly curved (see photos!). This distributes the pressure much better over the body, which makes the overbust corset very comfortable to wear despite its firmness.
So far, almost all people who have tested and tried on Pamela have described it as very comfortable. It can be perfectly laced, loose or very tight as desired, and brings the desired effect in any case and at any body size!
The beautifully curved cups accentuate the female forms.
The rods are made of metal and adapted to the body shape with a slight swing.
They are all firmer than you know it from most of our previous corsets. Nevertheless they are as comfortable as you are used to from SiaLinda!
All of them have a waist band that can be used for a strong waist reduction if desired. This means you can tie very tight, but of course you don't have to!
In addition you will find 6 garter loops which are concealed on the inside.
The fabrics are all of extra good quality!
Material & Care
Material:
Outer fabric: 100% polyesterInterior lining
: 100% cottonFastening bar
: Metal (nickel-free)
Corset stays:
MetalBack strap
: approx. 20cm wide
HEIGHT: | 180 cm - 5' 11” |
BUST: | 83 cm - 32” |
WAIST: | 57 cm - 22” |
HIPS: | 88 cm - 35 |
SHOE SIZE: | 39 - 6 |
Note: you can configure unique tab per product
LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt
- Machine wash
- Mashine wash, permanent press
- Machine wash, gentle or delicate
- Hand wash
- Do not wash
- 30°C or 80°F
- 40°C or 105°
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- 30°C or 80°F
- 40°C or 105°F
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- Do not wring
- Bleach if needed
- Do not Bleach
- Non-chlorine bleach if needed
- Non-chlorine bleach if needed
- Trumble dry
- Dry normal, low heat
- Dry normal, mediun heat
- Dry normal, high heat
- Dry normal, not heat
- Hanf to dry
- Drip dry
- Dry flat°
- Dry in the shade
- Don not dry
- Don not tumble dry
- Dry
- Do not dry Clean
- Iron any temp, steam
- Do not iron
- Maximum 110°C or 230°F
- Maximum 150°C or 300°F
- Maximum 200°C or 390°F
- No steam
- Dryclean
- Any solvent
- Except tetrachlorethylene
- Petroleum solvent only
- Wet cleaning
Note: you can configure same tab for all products at your store
Here we have compiled some questions that we receive time and again.
If you have another question, please do not hesitate to ask!
This can be done quickly and easily, for example, via our contact form.